Your location:
Homepage
/
/
/
Low price Marine adhesive on sales introduces how to use adhesives

Recommended news

Low price Marine adhesive on sales introduces how to use adhesives

(Summary description)The glued surface should be glued evenly to ensure infiltration and avoid air bubbles as much as possible. Due to pores, the bonding strength will be greatly reduced, leading to degumming. It should be noted that the position should be aligned at one time, not to be moved, pressurized, to exclude air, and to make close contact.

Low price Marine adhesive on sales introduces how to use adhesives

(Summary description)The glued surface should be glued evenly to ensure infiltration and avoid air bubbles as much as possible. Due to pores, the bonding strength will be greatly reduced, leading to degumming. It should be noted that the position should be aligned at one time, not to be moved, pressurized, to exclude air, and to make close contact.

Information

Do you know how to use the adhesive? Follow the editor of Low price Marine adhesive on sales for a simple understanding!
1. The procedures of the bonding process: Surface treatment: Surface treatment is carried out for different properties of adherends and different situations. Strictly can be divided into general methods, chemical methods and physical methods. In the decoration industry, simple treatment is mainly for the adhered objects. Such as: dust, oil, rough surface, moisture, etc., to ensure that the sticky surface is clean, dry and free of oil.
2. Gluing The surface to be glued should be evenly coated to ensure infiltration, and avoid air bubbles as much as possible. Due to pores, the bonding strength is greatly reduced, resulting in degumming. It should be noted that the position should be aligned at one time, not to be moved, pressurized, to exclude air, and to make close contact.


3. The process of curing the adhesive through chemical and physical action to make the adhesive layer solid. Curing is the next step to obtain bonding performance, which has a great influence on bonding strength. In the curing process, temperature, pressure, and time are three important parameters of the curing process. The change of each parameter has a direct impact on the bonding strength. (Each adhesive has a specific curing temperature and time). It should be said that a certain amount of pressure is necessary for all adhesives, because pressure is conducive to the diffusion and penetration of the adhesive, and it is in close contact with the adherend, which helps exhaust gas and moisture, and avoids bubbles and pores. The layer is uniform and the position of the adherend is fixed. Whether it is by chemical reaction or physical action to complete the curing of the adhesive layer, it takes a certain amount of time. In order to fully obtain the maximum bonding strength through curing, it is necessary to ensure that there is sufficient curing time.
The above is the editor of Low price Marine adhesive on sales: a brief introduction to the relevant knowledge about the use of adhesives.

Keyword:

Scan the QR code to read on your phone

Relevant Information

imgboxbg

TEL:+86-13793342792

WEBSITE:enhancefix.com

ADDRESS:Zibo City, Shandong Province.

FACEBOOK: zibojoyin@163.com
SKYPE: zibojoyin@163.com
WHATsApp:+86 13518630964

E-mail:zibojoyin@163.com

Follow us on Social Media

Copyright: ©2021  Shandong Enhance New Material Co., LTD. 

鲁ICP备2021029041号-1  国际站建站:中企动力 淄博

外贸谷歌推广 

搜索
Search