Customized ACETIC SILICONE SEALANT from China manufacturer is a widely used building material. If you want to use ACETIC SILICONE SEALANT from China manufacturer, what are the good methods and steps? Today, let's introduce the situation of customized ACETIC SILICONE SEALANT to help you better buy and use ACETIC SILICONE SEALANT from China manufacturer.

Usage of customized ACETIC SILICONE SEALANT from China manufacturer

1. Use of customized ACETIC SILICONE SEALANT from China manufacturer: ACETIC SILICONE SEALANT can be used immediately. It is easy to break it out of the plastic bottle with a glue gun, and its surface can be trimmed with a spatula or wood chips.

2. Adhesion time: the curing process of ACETIC SILICONE SEALANT develops inward from the surface, and the surface drying time and curing time of silica gel with different characteristics are different. Therefore, if the surface is to be repaired, it must be carried out before the surface drying of glass adhesive (acid adhesive, neutral transparent adhesive generally should be within 5-10 minutes, neutral mottled adhesive generally should be within 30 minutes). If color separation paper is used to cover a certain place, it must be removed before the outer skin is formed after gluing.

3. Curing time: the curing time of customized ACETIC SILICONE SEALANT from China manufacturer increases with the increase of bonding thickness. In various bonding occasions, including sealed conditions, the bonding effect should be comprehensively checked before the equipment after bonding is used. During the curing process of customized ACETIC SILICONE SEALANT from China manufacturer, a smell will be produced due to the volatilization of acetic acid. This smell will disappear during the curing process and there will be no peculiar smell after curing.

4. Bonding: wipe the metal and plastic surfaces completely and remove oil stains. Then, in addition to rinsing all the surfaces with acetone, the rubber surface should be polished with sandpaper and then wiped with acetone. Please observe the precautions when using acetone; Apply silicon acetate sealant evenly on the prepared surface of the object. If the two surfaces are bonded, put one side in position first, and then squeeze the other side with enough force to squeeze out the air, but be careful not to squeeze customized ACETIC SILICONE SEALANT from China manufacturer; Place the bonding device at room temperature and wait for the customized ACETIC SILICONE SEALANT from China manufacturer to cure.

5. Sealing: when using customized ACETIC SILICONE SEALANT from China manufacturer for sealing, also follow the above steps. Squeeze the customized ACETIC SILICONE SEALANT into the joint surface or gap to make the customized ACETIC SILICONE SEALANT from China manufacturer fully contact the surface.

6. Cleaning: before curing, the customized ACETIC SILICONE SEALANT from China manufacturer can be wiped off with cloth or paper towel, and after curing, it must be scraped off with a scraper or wiped with solvents such as xylene and acetone.